L&YR Battery Electric Locomotive #2

Submitted by Peter Davis on
Zip archve

The following link will allow you to download the complete model and text in a single .zip archive file.

Download complete archive
Alternatively you can access all the files and information below.
.375 scale, all parts now added. Peter D
Details
Model prototype
Electric » Locomotive
Region/Company
LMS » L&YR (Lancashire and Yorkshire Railway)
Diagram
#2
Era start year
1917
Era end year
1947
Model Status
Concept
License
Creative Common Attribution-NonCommercial-ShareAlike CC BY-NC-SA
Models
3D Model
30 mm wheel 10 spoke.stl
May need to be reamed for 3mm axle,
3D Model
Axle 6.4 x 40mm 3.4.stl
3D Model
EV-2.hand rail bend jigs.stl
I used these jigs along with "Beadsmith" wire bending pliers to form the 1mm brass handrails. The notch indicates the cut length.
3D Model
EV.001.0 Frame.stl
3D Model
EV.002.0 Buffer Beam.stl
Tap side holes M2
3D Model
EV.003.0 Axlebox.stl
Locates to the frame with 4mm od x 3mm id X 7mm l Brass bearing. A few spots of glue to hold in place.
3D Model
EV.004.0 Steps.stl
Attaches with m2 X 10 mm long c'sink screws
3D Model
EV.005.0 Buffer Head.stl
3D Model
EV.005.0 Buffer Stock.stl
3D Model
EV.006.0 Hook Plate.stl
3D Model
EV.006.0 Hook.stl
3D Model
EV.007.0 brake shoes.stl
Tap m2 top hole
3D Model
EV.009.0 roof.stl
3D Model
EV.010.5 Footplate.stl
3D Model
EV.011.0 Brace.stl
Tap each end M2
3D Model
EV.012.0 Bonnet.stl
Tap the 4 holes M2.
3D Model
EV.014.0 Number plaque.stl
#2 Number Plaque with removable handle for painting.
3D Model
EV.016.0 Cab.stl
3D Model
EV.021.2 cab floor malcolm.stl
Folders
Folder
Title
Mount for N-20 motor by Don Recardo
Notes

N-20 motor mounts by Don Recardo. Axles 4mm ground steel 53 mm long. Bushing 8mm dia with 4mm bore to suit axle, 29mm long.

Images
Image
EV-2 Assembly N-20 motor.jpg
Models
3D Model
20 Tooth spur by Don Recardo 4mm bore.STL
3D Model
EV.1.30 mm wheel 10 spoke 4mm Bore.stl
3D Model
fixed10 tooth by Don Recardo 3mm bore.STL
3D Model
motor mount with inserts modified less 0.8mm by Don Recardo.STL
Folder
Title
Truck style motor by Malcolm High
Notes

A truck style mount by Malcolm High.

Documents
4-4-22.42 tooth gear Fixture.pdf
4-4-22.Notes on building the drive unit for EV engine by Pater Davis.pdf
4-4-22.Turned Parts 42 tooth drive.pdf
Driv3 for Peter Davis 36.pdf
Images
Image
4-4-22.Motors and drive no battery Presentation.jpg
Image
EV-2 Assembly w-truck style motor.jpg
Image
Motors and drive no battery.jpg
Image
zDriv3 for Peter Davis 36.jpg
Models
3D Model
EV.1.30 mm wheel 10 spoke 4mm Bore.stl
3D Model
EV.30mm wheel 10 spoke 3mm bore.stl
3D Model
MH.20.3 truck 42t malcolm rx.stl

Reviews/Comments (subject to moderation)

New reviews/comments will not be published until they have been reviewed by a moderator.
Contact details are optional.
The content of this field is kept private and will not be shown publicly.

Restricted HTML

  • Allowed HTML tags: <a href hreflang> <em> <strong> <cite> <blockquote cite> <code> <ul type> <ol start type> <li> <dl> <dt> <dd> <h2 id> <h3 id> <h4 id> <h5 id> <h6 id>
  • Lines and paragraphs break automatically.
  • Web page addresses and email addresses turn into links automatically.
Please tick if you have built this model
Difficulty
If you have built this model, how difficult did you find it?
CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.