Models

.stl files to 3D print a 1/32nd scale Lancashire & Yorkshire Railway horsebox to Diagram 109A.

Uses Slaters 10mm coach wheels S9121. Slaters bearings used in solebar and pivoting piece. Centre wheelset needs a slotted bearing 1/8" wide, 3.2mm deep and 10mm dia with a short 1.6mm spigot of 6.3mm diameter to locate in the solebar and fixed with superglue or epoxy. 1/16 stainless rod connects the two Slaters coupling hooks (G9026) and also acts as the pivot for the compensated wheels.

From drawings in FJ Roche's "Historic Wagon Drawings"
9.6mm Scale (3/8")

OpenSCAD-Totem- for-belt-printer-3mf

Scaled from a very old OO gauge kit

50 gallon (nominal capacity) drum, drawn full size. Scale to suit (see notes).

These are a few parts I designed for my Class 08 which I rescaled to 10mm from the original files by Peter Davis in 3/8" to the foot. I hope I have uploaded sufficient information for others to be able to make this really great model.

3d printed tooling / jigs / fixtures to aid G1 modelling

Here is the separate LMS platform trolley deck.
I measures 6' x 3'.
Cheers,
David Leech

Here are the parts for the LMS platform trolley

ere are the parts for the LMS platform trolley LESS the deck for those who might find it easier to print.
Cheers, David Leech

Hopefully, here is the file for the parts for an LMS Platform Trolley.
It is 'full size' and the height of the trolley top is 6' 0", so you will need to calculate that for your slicer. I used small panel pins for the axles.
Cheers,
David Leech

The development of a universal (for outside frames) axle hung motor/gearbox, as much as possible 3d printed

The battery cover on my digital micrometer disintegrated, this is the stl file of the one I made to replace it. Print with 100% infill to make it strong. The spigot may need to be filed down to fit your tool.

1/32 scale. From drawings in Historic Carriage Drawings Vol 1 by Nick Campling. Also see drawing posted by Mark Reader · #2510 · Jan 5
Peter F Davis

Overlay of spring detail for coach bogie

3/8 scale. Hopper just fits a 220mm X 220mm table. From drawings in a 1972(?) Model Railway Constructor(?). Peter Davis

A set of .stl files as components for the steam turbine designed by Werner Jeggli, Designed for precision lost wax bronze casting with the wax positives individually 3D printed. Details of the turbines Werner has built are in his many articles and soon will be in a book that is being created.

Three sanding pads that fit Braun Oral B power tooth brush and allow Proxon PS13 pen sander abrasive pads to be used. This gives oscillating rotary sand options the PS13 has a linear reciprocating action.

Driver wheels for both LNWR and Stanier Jubilee Locos (quite different)
Modelled as an exercise following exchanges with Mike Palmer
Peter Jackman

A summary of various drain coack types and a picture of how to make the automatic type (must be mounted horizontally)

1:32 scale underframe with compensation (3 point suspension) to fit the Adrian Johnstone's RCH wagon body or end door body.

3/8 scale. Following ian beattie's drawing's in Railway Modeller magazine July 1990.

July 2024; I've updated the cab control panel by adding details and changed the underside of the rood to suit.

Flexible roof generator in OpenSCAD by Adrian from Peter Jackman's drawings

Replacement buffer beam for the Thingiverse Terrier