Models

Printable parts inspired by the Airfix/Dapol Kit Re-loaded as the folder originally created in May 2020 was deleted.

I have been using these for laying Cliff Barker track, and hope they may be useful to others. They are almost all for Cliff's widened (45.5mm gauge) track and click into place between the rails very satisfyingly. Only 240 mm long because that was the longest I could easily print. The size is shown on top.

Part files based on Airfix H0/00 kit loaned by Trevor Boulton.
Additional detail from RCH wagon part drawings.
Parts designed to be printed flat on filament printer bed. Support will be required under some overhangs. Assembly intended by adhesive or solvent weld.
Some parts e.g. buffer guides will need 0.2mm dia extruder nozzle.
At time of loading I have only printed wheels and wagon ends. Print as you fancy and let me know of any changes needed. Peter J.

Template spreadsheet for printer owner reports

STL and STEP files for a 1:32 scale 3' 7" Mansell wheel and a complete wheel set with 40mm back-to-back / G1MRA coarse standard

A folder for members to upload files in .step or .stp format.

A spreadsheet file to convert full-size dimensions to either 1/32nd or 10mm:foot scales.

Multiple piece kit style 10 mm scale. From drawings found in "Historic Wagon Drawings in 4 mm Scale" by F.J. Roche. And information found in the G1 NL&J. #250. By Peter Davis

One piece body and underframe. Modelled at 10mm/ft. Two rib buffer stock modelled separately.

Multiple piece kit style, Assembles to LNWR/LMS 45' Brake 10 mm scale.
by Peter Davis

An early L&Y brakevan, circa 1860.....